Element Specification
| Model |
Average permeate
flow gpd (m³/day)(1)(2) |
Average NaCl
rejection (1)(2) |
Minimum NaCl
rejection (1)(2) |
| AG2540TM |
750 (2.8) |
99.5% |
99.0% |
| AG4026F |
1,600 (6.1) |
99.5% |
99.0% |
| AG4040C |
2,400 (9.1) |
99.5% |
99.0% |
| AG4040FM |
2,400 (9.1) |
99.5% |
99.0% |
| AG4040FM,34 |
2,200 (8.8) |
99.5% |
99.0% |
| AG4040TM |
2,400 (9.1) |
99.5% |
99.0% |
| AG8040C |
10,000 (37.9) |
99.5% |
99.0% |
| AG8040F |
10,000 (37.9) |
99.5% |
99.0% |
| AG8040F 400 |
11,000 (41.6) |
99.5% |
99.0% |
| AG8040N |
9,600 (36.3) |
99.2% |
98.5% |
| AG8040N 400 |
10,500 (39.7) |
99.2% |
98.5% |
| AG8340F 400 |
10,500 (39.7) |
99.5% |
99.0% |
(1) Average salt rejection after 24 hours of operation. Individual flow rate may vary ±20%.
(2) Testing conditions: 2,000 ppm NaCl solution at 225 psi (1,551 kPa) operating pressure, 77°F (25°C), pH 7.5 and 15% recovery.
| Model |
Membrane area ft² (m²) |
Outer wrap |
Part Number |
| AG2540TM |
27 (2.5) |
Tape |
1206729 |
| AG4026F |
60 (5.6) |
Fiberglass |
1206756 |
| AG4040C |
90 (8.4) |
Cage |
1206757 |
| AG4040FM |
85 (7.9) |
Fiberglass |
3032513 |
| AG4040FM,34 |
80 (7.4) |
Fiberglass |
3154063 |
| AG4040TM |
85 (7.9) |
Tape |
3032514 |
| AG8040C |
380 (35.3) |
Cage |
1222546 |
| AG8040F |
365 (33.9) |
Fiberglass |
3032515 |
| AG8040F 400 |
400 (37.2) |
Fiberglass |
3032518 |
| AG8040N |
365 (33.9) |
Net |
1231784 |
| AG8040N 400 |
400 (37.2) |
Net |
1231786 |
| AG8340F 400 |
400 (37.2) |
Fiberglass |
3048370 |
Operating & CIP Parameters
| Typical Operating Pressure |
200 psi (1,379 kPa) |
| Typical Operating Flux |
10-20GFD (15-35LMH) |
| Maximum Operating Pressure |
Tape: 450 psi (3,103 kPa) Other outerwrap: 600 psi (4,137 kPa) |
| Maximum Temperature |
Continuous operation: 122°F (50°C)
Clean-In-Place (CIP): 122°F (50°C) |
| pH range |
Optimum rejection: 7.0-7.5,
Continuous operation: 2.0-11.0,
Clean-In-Place (CIP): 1.0-13.0(1) |
| Maximum Pressure Drop |
Over an element: 15 psi (103 kPa)
Per housing: 50 psi (345 kPa) |
| Chlorine Tolerance |
1,000+ ppm x hours, Dechlorination recommended |
| Feedwater |
NTU < 1
SDI15 < 5 |
(1) Refer to Cleaning Guidelines Technical Bulletin TB1194.
