Part Number
Part Number | 3187651 AG FR H Series High Performance, Fouling Resistant, High Rejection Brackish Water RO Elements, AG-400 FR H |
The AG FR H Series of thin-film reverse osmosis (RO) membranes are designed to perform in challenging brackish water applications where high rejection is critical and fouling remains a key consideration. AG FR H Series membranes combine SUEZ chemistry and manufacturing advancements to deliver differentiated performance over the life of the element both in ionic rejection and in the rejection of uncharged or lightly charged species such as silica. Fouling resistance was also integrated into the membrane chemistry and element design for an optimized, long lasting, high performance element that is used in industries such as chemicals, mining, steel, and coal-to-chemicals.
All AG FR H Series membranes have NSF 61 certification for use in challenging municipal applications such as surface water treatment for drinking water with intent to remove emerging contaminants such as PFAS (per- and polyfluoroalkyl substances) compounds with a wide spectrum of size and structure.
Part Number | 3187651 AG FR H Series High Performance, Fouling Resistant, High Rejection Brackish Water RO Elements, AG-400 FR H |
Model |
Average permeate flow gpd (m³/day) (1)(2) |
Average NaCl rejection (1)(2) |
Minimum NaCl rejection (1)(2) |
AG-400 FR H | 11,000 (41.6) | 99.8% | 99.5% |
(1) Average salt rejection after 24 hours of operation. Individual flow rate may vary ±20%.
(2) Testing conditions: 2,000 ppm NaCl solution at 225 psi (1,550 kPa) operating pressure, 77°F (25°C), pH 7 and 15% recovery.
Model | Active area ft² (m²) | Outer wrap | FeedSpacer (mil) | Part number |
AG-400 FR H | 400 (37.2) | Fiberglass | 34 | 3187651 |
Typical Operating Pressure | 200 psi (1,380 kPa) |
Typical Operating Flux | 10-20 GFD (15-35 LMH) |
Maximum Operating Pressure | 600 psi (4,137 kPa) |
Maximum Temperature |
Continuous operation: 122°F (50°C) Clean-In-Place (CIP): 122°F (50°C) |
pH range |
Optimum rejection: 7.0-7.5 Continuous operation 2.0-11.0 Clean-In-Place (CIP): 1.0-12.0 (1) |
Maximum Pressure Drop |
Over an element: 15 psi (103 kPa) Per housing: 50 psi (345 kPa) |
Chlorine Tolerance | 1,000+ ppm-hours, dechlorination recommended |
Feedwater |
NTU < 1 SDI15 < 5 |
(1) Please refer to Cleaning Guidelines Technical Bulletin TB1194
Get in touch with us! We’re here to help you find the solution that best resolves your challenges around water filtration.
Get in touch with us! We’re here to help you find the solution that best resolves your challenges around water filtration.